Main Feature

| Chassis with 2 CPU + 4 line card slots
| Available line cards include 8 port 10G, 24 port GE types
| Up to 768Gbps capacity with dual switch fabric/CPU
| Power Supply, CPU and switch fabric redundancy
| IPv4 L3 hardware based routing
| IPv4 L3 hardware based multicast routing
| Suports L2 and L3 MPLS
| MEF 9 Abstract Test Suite for Ethernet Services at UNI
| MEF 14 Abstract Test Suite for Traffic Management
| Supports 10G Ethernet over WDM
| Bandwidth configuration and QoS, Q-in-Q features
| Multiple Rings Protection Switching per EAPS
| OAM Features

Automatic Protection Capability

- EAPS (RFC3619): Switchover time:<50ms
- Failure detection
   Loss of Light/Signal
   Manually Initiated Switch
- In-service addition of nodes to the ring

Management Features

- Command Line Interface (CLI), SNMP v1,v2
- SSHv2,Telnet, FTP/TFTP
- Remote In-band Management
- Hitless software local and remote upgrade
- Alarm: traps and dry-contact
- RADIUS & Syslog
- RMON: RFC2819 groups: Ethernet history, Alarm, and Event;
- Reports for customer validation

Network Management System (NMS)

- Client-server Based NMS using Java Graphic Interface
- MySQL Database for Information Collection and Storage
- Can operate in multiple OS environment (Windows or Linux)
- Topology based Network Management with Auto-detection of sub-networks or elements
- Monitors and Supervises the Entire Access Network Built Based on    Dowslake Products
-Can integrate 3rd Party Element Management System (EMS) Based    on SNMP, CLI or HTTP

L3 Routing Capability

- Comprehensive IPv4 unicast routing support
   Static, RIP, OSPF, IS-IS, BGP-4 support
   Support for VRRP
   8-path Equal Cost Multipath (ECMP)
   Supported IPv4 multicast protocols include PIM-DM,PIM-SM, PIM-SSM
   IGMP v2/v3 routing and snooping support
- Hardware-based Layer 3 and Layer 2 ACLs
   Ability to bind multiple ACLs to the same port
   Hardware-based receive ACLs
- security capabilities:
   Port-based network access control using 802.1x or MAC
- port security
   Root guard and BPDU guard
   Broadcast, multicast and unknown unicast rate limits
   ARP Inspection for static entries

MPLS Capability

MTS6000 comes with MPLS capability. It provides a complete solution for MPLS, Layer 2, and Layer 3 virtual private networks (VPNs) by using MPLS based virtual private wire service (VPWS) and VPLS (virtual private LAN services). MTS1928 can operate the following functions:
- MPLS label operation in the core
- VPWS ( L2 MPLS pseudo-wires or L2 MPLS PWE)
   RFC4448—encapsulation methods for transport of Ethernet over    MPLS
   Provides a point-to-point Layer 2 virtual circuit that allows extension    of a LAN seg ment across MPLS cloud networks.
   Provides the MPLS lookup at the end of the PW to determine the    final output port (after decapsulating or terminating the packet)
- VPLS
   Provides a point-to-multipoint service
   Support for hub and spoke VPN and mesh VPN topologies
   Provides a full L2 lookup at the end of the PW based on the inner L2    header
- L3 MPLS-VPN using BGP VPN extensions (RFC2547)
   Provides address space and routing separation through per-VPN    routing tables (VRF)
- L3 MPLS traffic engineering (TE)
- Fast reroute non-shortest path routing)
- MPLS DiffServ

Automatic Protection Capability

- EAPS (RFC3619)
- Failure detection
   Loss of Light/Signal
   Manually Initiated Switch
- In-service addition of nodes to the ring

SLA Statistics Capability

- Ethernet Frame Loss Ratio (FLR)
- Ethernet Frame Delay (FD)
- Ethernet Frame Delay Variation (FDV)
- Errored Symbols Seconds
- Errored Frames Seconds
- Ethernet statistics
- Link status