 |
MTE5900 | 10G EPON OLT  |
| |
|
 |
| Main Features |
| Modularized design with 176Gbps high density and large capac
ity easy for expansion and upgrade.
| Support L2/L3 switching,static routes, RIP,OSPF,BGPIS-IS.
| Redundant Main Control Unit and Power Supply
| Hitless Protection System (HPS) secures the high reliability.
| Up to 56 EPON ports, a maximum optical ratio of 1:64,
| Support various interface types including GE, TE, GEPON.
| Supports CTC2.0/2.1, automatically detects and works harmoni
ously with ONUs made by different manufacturers.
| Support 802.3ah OAM. |
|
| Overview |
L2 Switching Capability |
MTE5900 OLT series adopts the DROS operating system whose in
telligent property is owned by Dowslake, integrates with
IPv6, network security, EPON, supports data, voice and video,
and provides continuous forwarding, graceful restarting and
ring protection, improving the work efficiency and securing
the maximum running time.
MTE5900 OLT series includes two models:
MTE5910 (2 slots for MSU, 2 enhanced slots and 6 normal
slots)
MTE5616 (2 slots for MSU, 2 enhanced slots and 12 normal
slots).
All MTE5900 OLT products support the console board and the
“1+1” backup of power supply. MTE5900 OLT series can be
widely applied on the networks of the carriers, EPON in the
NGB upgrade of the Residental FTTH, Broadcast, TV and film
system, or automatic power distribution, power-consumed in
formation collection and FTTH in the electric power industry. |
- Auto-negotiation for port speed and duplex mode Flow Control:
- IEEE 802.3x & Back-Pressure
- EAPS/ERPS 50ms Ring protection
- Spanning Tree Protocol:
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- VLANs:
4K IEEE 802.1Q VLANs,Port-based VLAN,Q-in-Q 802.1ad Vlan
stacking,Inner tag translation
- Link Aggregation:
Static Trunk,IEEE 802.3ad LACP,
Load Balancing: SA,DA,SA+DA,SIP,DIP,SIP+, DIP
- Multicast
IGMP Snooping, IGMP Proxy query
- DHCP
DHCP Relay, DHCP Option 82,DHCP Server,DHCP Snooping
- Mirror
Port Mirror, Remote Mirror
- Management
Console,CLI,WEB,SNMPv1/v2/v3,Out of Band
Radius,TACACS+,Syslog,FTP/TFTP,NTP client,AAA Authentication |
| Application Example |
QoS Capability |
GEPON, short for Gigabit Ethernet Passive Optical Network, is a
point to multipoint, fiber to the premises network architecture
in which unpowered optical splitters are used to enable a single
fiber to serve multiple premises, typically 16~64. It consists
of OLT, ODN, ONU, etc. The downstream signals are broadcast to
all premises sharing a single fiber, while upstream signal are
using TDMA technology. |
- 8 Priority Queues
- Two levels of hierarchical scheduling policing parameters:
CIR, PIR, CBS, EBS
- Priority Queues Scheduling Scheme:
SP, WRR, WDRR, SP+WRR/WDRR
- QoS&Ratelimiting Policing: Per flow, EVC, VLAN, UNI port
- Traffic classification and priority management based on:
IEEE 802.1p COS
IP Precedence/DSCP TOS
TCP/UDP port number
IP Address
Mac Address
Ethernet Type
C-VLAN
RFC 2698 and MEF specs 10 marker (colors) |
| L3 Routing Capability |
- Comprehensive IPv4/v6 unicast routing support
Static, RIP, OSPF, IS-IS, BGP-4 support
Support for VRRP
8-path Equal Cost Multipath (ECMP)
Support IPv4/v6 multicast protocols include PIM-DM,PIM-SM,
PIM-SSM
IGMPv1/v2/v3 routing and snooping support
- Hardware-based Layer 3 and Layer 2 ACLs
Ability to bind multiple ACLs to the same port
Hardware-based receive ACLs
- Security capabilities:
Port-based network access control using 802.1x or MAC
- Port security
Root guard and BPDU guard
Broadcast, multicast and unknown unicast rate limits
ARP Inspection for static entries |
|
| Product Specifications |
Order Matrix |
Expanded slot |
MTE5910: 2x slots for the Main Control Unit
2 10G uplink slots
6 GE or PON slots
MTE5916: 2 slots for the Main Control Panels
2 10G uplink slots
12 GE or PON slots |
Switching Capacity |
MTE5910: 128Gbps
MTE5916: 176Gbps |
Max Ports |
MTE5910: 4x10G + 24GE or 24 PON
MTE5916: 4x10G + 48GE or 48 PON |
EPON Standard |
Support IEEE 802.3ah EPON standards
Support Hardware/Software DBA&SLA algorithm
Manual/Automatic Authentication
AES 128bit Encription |
Wavelength of PON port |
Downstream1490nm; upstream 1310nm |
Rate |
Symmetric uplink and downlink: 1.25G |
Average irradiating power
of the PON port
Receving Sencitivity |
+2dbm ~ +7dbm
- 6dbm ~ - 27dbm
|
Protection |
Support backbone optical-fiber protection, “1+1” hand-in-hand
protection, full protection, switchover delay of less than 50ms. |
MAC table |
32K |
ARP table |
8K |
ACL table |
4K/per card |
VLAN table
QinQ table |
4K
4K |
Routing table |
12K/per card |
Port Queue |
8 /per port |
Link Aggregation Group |
32 |
DBA bandwidth control |
1K step |
Operating temperature
|
0°C～60°C
|
Relative Humidity |
10%～85% no condensation |
Storage temperature
|
-40°C～80°C
|
Relative Humidity |
5%～95% no condensation |
Power source’s characteristics
|
AC power: 200-240VAC, 50/60 Hz
DC power: -48V
|
Physical size (H*D*W) |
468mm×440mmx482mm |
Power consumption
|
300W
|
Certification |
CE |
|
MTE5900 10G EPON Service |
|
|
Description |
Code |
Model |
Chassis of MTE5910 OLT (one AC220V power for standard configuration; Max support 2 Power
Supplys, 6 gigabit slots, 2 10G uplink slots, 2 slots for Main Switching Unit |
7020-160 |
MTE5910-Chassis |
Chassis of MTE5910 OLT (one DC48V power for standard configuration; Max support 2 Power
Supplys, 6 gigabit slots, 2 10G uplink slots, 2 slots for Main Switching Unit |
7020-161 |
MTE5910-Chassis-DC |
Chassis of MTE5916 OLT (one AC220V power for standard configuration; Max support 2 Power Supplys, 12 gigabit slots, 2 10G uplink slots, 2 slots for Main Switching Unit |
7020-162 |
MTE5916-Chassis |
Chassis of MTE5916 OLT (one DC48V power for standard configuration; Max support 2 Power Supplys, 12 gigabit slots, 2 10G uplink slots, 2 slots for Main Switching Unit |
7020-163 |
MTE5916-Chassis-DC |
AC power source of MTE5900 OLT (Input voltage: AC 100-240V, maximum power consumption: 300W) |
7020-164 |
MTE59-PWR-AC |
DC power source of MTE5900 OLT (Input voltage: DC -48V, maximum power consumption: 300W) |
7020-165 |
MTE59-PWR-DC |
The style I MSU of MTE5910 OLT |
7020-166 |
MTE5910-MSU-I |
The style I MSU of MTE5916 OLT |
7020-167 |
MTE5916-MSU-I |
The style II MSU of MTE5910 OLT,support selective QinQ |
7020-168 |
MTE5910-MSU-II |
The style II MSU of MTE5916 OLT,support selective QinQ |
7020-169 |
MTE5916-MSU-II |
4-port OLT EPON interface board, SFP interface (excluding the OLT SFP optical module) |
7020-170 |
MTE59-4PON-SFP |
4-port gigabit uplink board (optical-electricmultiplexed interface) |
7020-171 |
MTE59-4GE-TX/SFP |
10G uplink board with 1 port, SFP+ interface |
7020-172 |
MTE59-1TE-SFP+ |
10G uplink board with 2 ports, SFP+ interface |
7020-173 |
MTE59-2TE-SFP+ |
OLT SFP optical module (a 20km transmission distance as to the 1:32 optical coupling ratio; a 10km transmission distance as to the 1:64 optical coupling ratio; SC; TX1490nm; RX1310nm;1.25G) |
7020-174 |
OLT-GSFP-20 |
Please Order pluggable SFP/XFP separately. |
|
|
|
|
| |
|
|
|
|
|
